BulletPro 502 Portable 5 Gas Analyzer with Printer & External Water
Measure concentration of HC, Co, Co2, O2, and NO in vehicle exhaust emissions
LCD screen, NDIR (non-dispersive infrared) components, and advanced gas sensors and imported parts
Automatic zero reset, calculation, and display of A/F (air fuel ratio) & Lambda ratio
Measure emissions from vehicle engines fuels of CNG, LPG, and Ethanol gasoline
Equipped with RS232C digital serial communication interface, rotation speed, and oil temperature measure port
Printer built-in for printing result
License Number Plate entry and time display; 700 groups of data storage and review
Quick response time: less than 10 sec; warm up time: 8 min
Special external water trap design to avoid water contamination
Power: AC240V 50 Hz
Weight: 9 kg
Dimension: 310 mm x 230 mm x 485 mm
HC: 0 to 9999 ppm vol
CO: 0 to 10%
CO2: 0 to 18%
O2: 0 to 25%
NO: 0 to 5,000 ppm
HC: ±10 ppm (absolute error) or ±5% (relative error)
CO: ±0.03% (absolute error) or ±5% (relative error)
CO2: ±0.5% (absolute error) or ±5% (relative error)
O2: ±0.1% (absolute error) or ±5% (relative error)
NO: ±25% (absolute error) or ±4% (relative error)
Searching for a gas analyzer online could be a bit confusing, if you do not narrow your search to the car version gas analyzer. The reason for the confusion is majorly because of the many kinds of the devices in the industrial sector which also have the same name and have similar functions. If it is the version for use on a car you are interested in, then you are in the right place to get the basic information on this great Garage Equipment.
This gadget is a safety device that could end up saving your life as well as saving you time and money. Its use in car diagnosis cannot be overemphasized, because it can save a lot of time in the workshop. Time savings come from your ability to have detected the issue with your car before taking it for repairs; hence you save the waiting time for diagnosis. As regards the money to be saved, this is how. Since you would have detected the issue that is wrong with your vehicle before heading to the auto mechanic’s workshop, all you need to do is to tell the helper the issue with your car and be attended to accordingly. You would have saved yourself the money of diagnosis at that instance.
Very useful thing about this is that it is a safety measure for automobile users. Car fault can happen anytime & puts driver into a great risk. Using this machine driver would be notified about the problems which can be occurred ahead of time.
This machine can be put to a number of uses to diagnose the problems that might be present in a vehicle. The following are just some of the things you can use it for and remain safe.
Leakage in the evaporative emission system can be detected & there issues can be diagnosed.
Fuel odor inside as well as around the automobile can be detected.
Issues in the air injection emission system can be diagnosed.
Presence of combustible gas in the cooling system can be sensed.
Leakage in the exhaust system can be detected easily.
Below is an illustration of how to use the device for the detection of a spark or fuel in a car that refuse to start:
A probe of the device is inserted in silencer of the vehicle
Ignite the engine for 15 seconds, in the meantime the required readings are gathered by the analyzer.
Check the display of consuming gases on the analyzer.
Now analyze the readings & check why the vehicle not working.